Found this bit of blurb on the subject but i dont know how accurate it is.
Bob
If using the standard Zetec flywheels, you will need the starter motor from any OHC Pinto based Sierra from 1982-1989 or any CVH based Sierra from 1987-1993. This is a Lucas LRS543 or equivalent.
Please be aware that this is available in two variants with different diameter motor housings, one around 3½" in diameter and the other around 5" in diameter. The one with the lager diameter motor housing will not fit and will foul on the sump. Therefore, you will need to specify the smaller diameter model.
|