Not really sure how it would make it easier. I just cut the nipple off one end of the cable and took off the plastic & metal sheath from that end of the cable. I then fed it through like it says in the book and got a rough idea how much to cut off by lining it up to the handbrake arm in the brake assembly. I then cut down the sheaths and the cable so just a bit of metal sheath went thru the plate by the diff (which I then tightened up with the plastic nut things that where on the sheaths). I then just got one of the solderless nippless off ebay to put on the end of the cable I cut and put a small blob of weld on to make sure it held.
|