Right so I tried the multimeter out on the ignition wires that connect onto where the key turns. I set it to 20 volts AC, put the black on the battery negative and the red on each wire (the loom positive connections where also connected to the battery positive). I've got a red, yellow, blue/black, and yellow black wires connecting on there. For some of the readings, it would first flash up with a number somewhere between 7 and 16 then after a second just show 1.
key position off (0)
red = 1
yellow = 0.01
blue/black = 1
yellow/black = 0
key position I
red=1
yellow=1
blue/black=1
yellow/black=1
key position II
red=1
yellow=1
blue/black=1
yellow/black=1
|