Quote:
Originally Posted by AdrianH
OK there was some issues with digital dashes where with pressing buttons the display went away from the mph readings, this was a fail. So there was some mod to stop it happening, yours may al;ready be OK, as I do not use the digital gear not really sure which one it was, but have a play with buttons and make sure you never lose it.
Are you getting close to completion and IVA?
Have fun
Adrian
|
oh rite, i think if you hold down a button for 3 seconds it goes into a settings menu and you loose the 0mph, other than that the buttons reset the trip and changes the small display from clock to water temp etc etc but you till keep the 0mph.
lots of small jobs left to do like trimming and some odd p clipping here and there but almost there. Want to try and get the paperwork sent off this month and hopefully should get a test date for October. Next week should have the exhaust finished and fitted then its a session on the rollers to get the omex mapped