Hi Johno,
Got your PM, i need your e-mail address so that i can send the skechtup drawings for the bones and jigs. I'll look at the drawings tonight just to make sure. Need to concentrate on the single seater at the moment but will make sure these drawings are correct at the same time. One thing that may need to be changed is the front upper as the transit drag link has a larger taper than the mx5 upright, in the past builders have reamed out the taper on the upright but there is a more suitable drag link but it is threaded M14 x 1.5mm so need to decide which is the better option.
Regards........AndyH
|