Set your meter to the Ohms switch (an omega sysmbol (Bit like headphones))
Set the dial to the top left setting that looks like a triangle with a line through it. also has a representation of a sound pulse ( picture is poor )
Touch the probes together and you should get a beep whilst they are connected.
Dis-connect the plug from the ignition switch.
Touch either probe on the positive side of the battery and whilst doing that touch the probe on each of the connections on the plug you just removed.
What are the results.
Also, take a wire from the small terminal on the starter motor, and touch it against the positive terminal on the battery. This should confirm the starter is working.
TT
|