First you would need to make the bucks then work out the surface area of all the said bucks then you need to work out how many layers of csm you want to make the final product with then you move onto your moulds at this point its worth pointing out that the mould should be made about 4 times thicker that the final piece
Cost to do a set of cycle wings will set you back about £150 once you have done the buck mould and then took the final piece from it
And then you gotta consider what your time is worth and how long before you want to use your car
If you really want to go for it then please make yourself aware of the time and cost involved
Just my rant hope it helps
|