I've been trying to read the wiring diagram and it looks like there should only be two wires on the ignition switch on the 1.6/1.8 cfi's. A red and yellow/black. It looks like the yellow/black should to to the anti-theft module (which I don't think I have), then it also seems to split and go to 1) power delay relay as a black wire? 2) ecu as a black wire [pin 5] 3) edis as a black wire [pin 8]. The red wire coming out of the ignition on the other had appears to split also and go to an engine managment relay, the battery positive, the ecu via a fuse [pin 1], and the power delay relay. Is the problem something like because I don't have the ecu plugged in, it's not completing the circut and i need to cut the ecu wires off and connect them up to each other?
|