28th September 2011, 10:33 PM
|
|
Junior Member
|
|
Join Date: Dec 2007
Location: Southampton
Posts: 16
|
|
Rs 1,2,3 (p43)
Quote:
Originally Posted by shaun
Hi all, I have welded RS 1,2 and 3 as per the book, when I came to mount onto BR12 my measurement is out by 3.1mm. The drawing on page 43 shows the distance from the rear face of BR12 to the outside of RS3 to be 406.9mm, I get 410mm. RS2 and 3 are exactly to the book measurement. Has anybody had this problem? this 406.9mm dimension looks important as this is where the hangers for the lower wishbone fit. If I put RS 2 and 3 onto the edge of BR12 my measurement is correct, but then there is no room for CP 1 and 2. Am I missing something? any help would be appreciated.
Cheers
Shaun
|
Hi Shaun,
I have got the same problem and am pulling my hair out....dont suppose you could walk me through what went wrong with yours?
Thx
Martyn |