View Single Post
  #3  
Old 17th November 2011, 09:04 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default

Are you getting any noise from fuel pump when you switch ignition on ? should spin up for a second or 2 to pressurise fuel rail..? you could run a live and neutral to the coil and a switched feed from ign to the starter motor and fire it up that way..also make sure all your eart wires are connected...i had that and 1 wire which had tucked itself away was stopping the whole thing fron going ..
Reply With Quote