Hi John,
I hope you don't mind but seeing as we have no body panels as of yet we used your measurements as a guide to fit an engine in my chassis this weekend.
We are using the same 1.6 engine from a 91 Eunos to set up the mounts for all our chassis's.
We were gutted to find out your engine fouled the bonnet as we plan to use the same panels. Andy advised me to sit the sump 50mm below the bottom of the chassis rails is yours the same? I have seen somewhere on the internet a modified sump cut short by 30mm but be dammed if i can find it now.. I plan too shorten my sump as we have speed bumps where I live and at work "just ask TSM Locost about the ones at work...LOL..."
We have been following your build with great intrest and only hope you carry on the good work.
Perhaps one day we can all meet up as I believe there are a few other fellow builders around this area.
If there is anything we can do to help in someway don't hesitate to speak to us as you have surely helped us.
Thanks from all of us Johno, Simon, Tony, Luke and Martin.