Spigot rings
I have found a set of 15" wheels originally fitted to Peugeot cars. The center bore of the wheels is 65.1mm while the required for Ford hubs should be 63.3mm. I have done a search for spigot rings but found nothing. I assume that they are not available since the diameter difference is so small. There is always the option to make some alumimun rings on a lathe but if they are commercially available this would save quite some trouble and time.
Has anyone ever run into this problem in the past? Can i find these spigot rings somewhere?
Do you recommend (safety-wise) to use the wheels with spigot rings, or i should search for some wheels that fit without the need for them? Thanks!
|