View Single Post
  #4  
Old 23rd January 2012, 06:58 AM
robo robo is offline
Senior Member
 
Join Date: Jun 2011
Location: scabs
Posts: 1,722
Default

Quote:
Originally Posted by Toyotus View Post
Maybe a bad example of Toyota attempting to re-engineer an ancient engine, but the Blacktop 4AGE has 45mm throttle bodies, injectors in head, and only a claimed 165hp, so something like 41hp/cyl, compared to the 65hp/cyl listed here for the 45mm throttle body. It appears they were just throwing more air and fuel in hopes of higher outputs, as opposed to smaller diameter increasing intake velocity. Similar to the 16v 4AGE attempts at more power with larger intake ports, and steeper valve angles, then later going to shallower angles and smaller intake ports.

Interesting figures though, obviously lots of trial and error I'm sure too!
I think its a valid point. years ago I had a twincam escort which was tuned <or should I say ruined> and most people were saying stick some 45`s on it, when I got to the weber agent he choked down the 40`s I had to 33mm . That was a 150hp engine.

Bob.
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory
If I had two brains I,d still be a halfwit

The cave http://s1116.photobucket.com/user/my...deshow/mancave

The build http://www.haynes.co.uk/forums/showthread.php?t=12669
Reply With Quote