Quote:
Originally Posted by andysredmini
Hi Skov.
Do you mind me asking where you positioned your seat belt anchorages (cp18). I am building a Saturn based mx5 chassis and have come to position them 140mm (from the back edge) from the front face of br12 as per the book but they are clashing with tt6 on the transmission tunnel.
I’m either think of cutting the anchorage down to retain the original measurement or pulling the whole bracket back so that it mates to the rear face of tt6.
|
Hi Andy, I'm pretty sure I put mine in the book position.
Are you sure you've got TT6 in the right place? It should be in the book position too, so there shouldn't be a clash
The position of the bottom anchorages isn't critical as far as I'm aware though, so moving them forwards or back a bit shouldn't be a problem.