[CTWV50]

Originally Posted by skov

Glad to see you've come out of hibernation Chris

Here's the tube I inserted into the lower holes in the rear uprights (you need 80mm per side if memory serves me correctly):

STEEL PRECISION TUBE 14mm OD x 300mm LONG 1mm WALL

And these are the bushes I stuck in the top of the uprights (£22.70 for a pair):

Mazda MX-5 Rear Upper Inner & Outer Suspension Bush SPORT poly STRONGFLEX

My column to rack UJ is rally design part# RD820F

Hope that helps!

Yes it's warmer now so I thought I'd get in the garage again and do a bit.

I've ordered the tube, thank you, but for the bushes did you just spec the 12mm int.dia. crush tube or do you have to speak with them first?

Understood you're using the RD820F for the rack UJ but what about the entention between it and the mazda column is it a sierra part or is it an extended mazda part.

Cheers

Chris