For the bushes I sent them a message asking if they could do them with 12mm internal diameter crush tubes. They replied saying no problem, and just told me to add a note saying that when I placed the order.
My steering column/shaft/linkages are pretty much the same as the Saturn/NTS build guide now.
The top part of the steering shaft is from the MX5, and the bottom part is the Rally Design steering shaft (RD849).
The bit joining them together is just some chunky mild steel tube (3mm wall I think). I couldn't tell you the diameter though - I just took the Rally Design shaft to my local steel supplier, and they let me stick it in various bits of tube until I found one that was a snug fit!
|