Quote:
Originally Posted by nickharding
Well I thought of using rivnuts underneath as then access to the prop can be gained easily. Now I think about it I can just rivet the bottom panel underneath same as everyone else, and just rivnut the inside tunnel panels and the back panel behind the seats. That might work out better.
|
What you can do is not "panel in" the underside where the tranny tunnel is, that makes the prop easy to get at from below,
or
fully panel in the whole bottom/underside & make the top of the tranny tunnel interior panel removeable ( this is how mine is ) as I thought getting into the prop would be easier from above rather than from below.
Also worth noting.....The IVA tester "may" want to see inside the tranny tunnel come test time.
cheers
andy