Ok i have hit a dilemma.I have tacked on the wishbone brackets and trial fitted the rear wishbone assembly.One side is all good but the other i have a problem with the upper one as it does not fit in the correct position because the 257mm is actually only 249mm.These were bought from a supplier(Saturn) so not easily rectified.Do i just tack the brackets to suit the incorrect dimension
or try to resolve the wishbone problem?(Dont really fancy making the jig for 1)
Also i seem to have lost 4 of the crush tubes! Does anyone supply these seperately or are Rally Design my best bet?(i know i would need to machine 2mm off these though).