hi Ozzy
I expect the wishbone pulled when being welded, that said 8mm is quite a lot, perhaps it was taken from the jig too soon !
Have you checked to see if the bush tubes are still square & true with each other ?
Easy to check on a flat surface with a couple of pieces of angle iron set at 90 degrees
You'll soon see if things are out of line.
If out of square then stretch them out as Kev has said.
I still have plenty of materials here & would be more than happy to make you a free one.
Downside is, I guess it'll not be very cheap to have it shipped over to Aus
Just let me know if I can help you out, would be happy to do so.
