I haven't had a chance to do much work to the car over the past week as a few of my mates are back from uni and I've been busy mountain biking, visiting a car show, learning how to row and more importantly, spending time at the pub!
However today I went to my mates house and he gave me a hand sorting out my scuttle as it needs all of the excess fibreglass cutting off with a dremel as well as applying a bit of clear gel coat to a few air bubbles in my carbon aeroscreen. I also decided while I was there that we'd try and make a boot panel and dashboard, so I've now ordered some carbon fibre fabric, some epoxy, a bit of 3mm coremat and finally some mould release wax. The plan is to have the top ply carbon fibre, the next coremat with a couple of plys of fibreglass on top, that way it should look like carbon but bring the cost down as fibreglass is about £5 per square meter compared to £30 of carbon fibre...
The plan is to make them next weekend so I will see how it goes and take some photos of the process. But hopefully I will have a carbon dash and boot panel for £85 with some carbon left over.
|