That's an odd one Dean
Here's a copy & paste of the adds
----------------------------------------------------------
clearout zetec and sierra parts
i cant move in the garrage attic as i have too much handy stuff i have kept but no longer need so here goes
all parts are in exeter devon collect for free or pay for postage
resonable offers please
if you have any Q please u2u me
from 1.8 cvh sierra 1993 unless stated
alternator with 5v pully (new recon on doner when broken) working when removed
set of cvh engine mount brackets
set of pinto engine mount brackets
4x engine mounts (rubbers)
peddel box inc throttle and brake switch
cvh hybrid ign pack/unit inc plug
exhaust manifold short tube type from blacktop
complete cvh carb/inlet manifold with pipes stat etc in good working order for cfi convertion
zetec parts
1800 ecu inc plug (can be wired to run without pats)
silvertop throttle body inc tps and plug
silvertop idle valve (3hole type)
blacktop throttle body inc tps and plug
1800 cvh flywheel reamed to fit zetec crank with almost new clutch (complete)
for zetec/type9 conversion trigger wheel needed
---------------------------------------------------------------
for sale project zxr636 ITB's on zetec manifold
i have made a manifold for my ms2 injection build with some zxr636 that i no longer need
its a silvertop injector plate with injectors,plugs,pipes, fuel rail and reg included. i tigged some shaped thick wall alloy tubes to fit in a jig to it
with a set of kawasaki zxr636 throttle bodies(38mm) with the motor and 2nd set of butterflys removed and holes plugged.
i have kept all the injectors to go with them if you wish to run them along with all other bits and bobs i have that went with them and will re fit what i have.
tps is still there but i dont have the vac hoses in the pic any more i have lost them somewhere sorry
there is a set of blue fluro hoses but i think i should have gone down a size but thay may squash up with some clips
needs a bit of cleaning up inside but all the hard work is already done
here are some pics note there are no zx injectors shown but are included and its all just resting on a bit of box for postioning thats not a chassis rail.
the boddies will fit either way up (eg. upside down)
spent quiet a bit of time and money on thease and would like them to go to a good home and recoup some of my build funds
in exeter for free colection or pay P&P reasonable offers only please
u2u any Q's you may have
zetec to zx636 bodies
Description
Description
----------------------------------------------------------
I don't expect the images will show though but I expect Baz will upload them to this thread when he gets a chance