Rob.....all the priming has been done with rattle cans ..simply because they were
litre for litre cheaper than buying primer and thinners (£2.45 400ml can) but not only that they are acrylic which ties in with the 2k acrylic top coat that I have, celly would not have liked that
.....the other spraying I have been doing has been done with a cheap and cheerfull ebay mini spraygun like this
http://www.ebay.co.uk/itm/Spray-Gun-...ht_1675wt_1063
it has the bonus of not needing to set pressure as it has both fluid and air control screws.....a little patience and it does reward you with a credible finish.