View Single Post
  #3  
Old 29th July 2012, 07:15 PM
swe7 swe7 is offline
Junior Member
 
Join Date: Oct 2008
Location: Gränum Sweden
Posts: 16
Default

Quote:
Originally Posted by voucht View Post
Hi,
Are you using a Sierra or another car master-cylinder ?
If you are using a Sierra M/C, 30mm above the lower edge of the plate leaves enough room for a 8mm bolt/nut on the lower fitting hole.
Hope this will help.
Yes its a sierra M/C.

Thank you.

Peter.
Reply With Quote