[big_wasa]

Originally Posted by alga

My current problem is that the diameter of the throttle body flange is 70 mm, but the space between the flange and the bonnet is around 60 mm. So it's not very easy to fit the intake bend under the bonnet, and scoops don't normally extend there.

Westfield played with the zetec and standard mani for a bit.

They used a plenum that was thought to be from a peugeot and a joiner.

http://www.locostbuilders.co.uk/gall...ne_plenum2.jpg

http://www.locostbuilders.co.uk/gall...ne_plenum1.jpg