Hi and welcome on the forum.
You can get Gaz Shocks dampers and springs
http://www.gazshocks.com/ and you can purchase them from Rally Design
http://www.rallydesign.com/, they have good prices.
You also can buy Protech
http://www.protechshocks.co.uk/, which, according to Spud69 on this forum (ex-Staurn) are very good and the guy at Protech is very helpful. Read this post:
http://www.haynes.co.uk/forums/showthread.php?t=8516
Personally, I bought Gaz Shocks (RD part number : G140/095B12-2 (4x = dampers) + RD1193/8 (2x = Front springs) + RD1189/9 (2x = rear springs)
Be aware that the shock absorber dimensions in the book are not completely right. You'll need 14'' open and 9'' closed for front and rear (or 13'' open with a 1'' extension, Gaz Shocks have 14'' open and 9.5'' closed). Springs should be 8'' (350 lbs) in the front and 9'' (250 lbs) in the rear (with a Pinto it is OK, but it might depend on your engine)
You can read this thread, (almost) all answers are in it:
http://www.haynes.co.uk/forums/showt...hlight=dampers
Hope this will help
