Made a start on my dashboard this weekend.
I've decided to make it out of ally and it will be padded and vinyled up when done.
I made a panel to hold the instrument cluster and cut a hole in the dash to to accomadate the bezel. I attached 4 thread inserts to the dash and fitted threaded rod into each. The bezel is then placed in to the dash and then the instrument cluster is tightened down onto it.
It took some sorting out but I also managed to panel underneath the dash as well, just need to fix the front edge to the dash edging angle.
I cut an access hole for my brake pedals in the top ally panel in front of my scuttle. I will make a cover for the steering column and access hole in one piece which will be removable.
