Thanks for the replies.
The pic is of the shock fully closed. Will measure up and see if they're the same as PorkChop's notes... Even starting from a slightly down position they will give very little bump travel.
Talon, yes I'm cleaning the joints up before I weld. The coating ia very very thin and is supposed to be specially formulated not to interfere with welds (vaporises in front of the arc) but I'd rather not have it in my welds. It's called Kleencoat or something like that. Most of the tubing you buy out here has it.
__________________
210hp Toyota Beams, 6 spd, MX5 Rolling gear, LSD, Saturn wishbones and diff carrier
|