Hello all!
Just about to start buying parts for my brake lines and would like to ask if any of you already have a complete shopping list of what i should get. To be honest i have spent the last few days trying to work out whats needed but all the different sizes are quite confusing and making my head hurt! I will list what i have below in two sections Front, Rear and Clutch. If anyone can fill in the blanks that would be fantastic!
Oh and brake light switch... inline or fixed into the pedal somehow.
FRONT
- Willwood master cylinder: 0.625 front
- fitting?
- 3/16 copper nickel line (4.8mm)
- fitting?
- T (not sure if this should be male or female
- fittings x2
- 3/16 copper nickel line (4.8mm) x2
- Fitting to mount on bracket x2
- flexi line?
- Mondeo v6 caliper (888/887 calipers on 283mm disc)
REAR
- Willwood master cylinder: 0.750 rear
- fitting?
- T (not sure if this should be male or female
- fittings x2
- 3/16 copper nickel line (4.8mm) x2
- Fitting to mount on bracket x2
- flexi line?
- Granada Scorpio rear disc(253mm), caliper and hub
CLUTCH
- Willwood master cylinder: 0.700 clutch
- fitting?
- 3/16 copper nickel line (4.8mm)
- fitting?
- flex line?
- Nissan skyline RB25DEt slave cyl