Should see me finished the exhaust today.....after reading about one of Jason's failure points, I decided I was going to incorporate a decibel killer into my exhaust while I could, so I got a piece of old exhaust tube blanked off one end , then cut some slits along the pipe and then dinted the tube in on one side of the slit meaning the exhaust would momentarily have to travel backwards before going forwards again which should give a small amount of noise canceling
As you can see from the pictures it is going in before the silencer which will help even more because most decibel killers just go inside the silencer, this will be removed post IVA as I want a straight through exhaust on final tuning, the last thing I will have to do will be a rolled exhaust tip.....will be making that as well
piccies as usual
