[quote=robo;90717]
Quote:
Originally Posted by Tatey
I was just wondering if it was a good idea not using the pump over tapping on the thermostat housing that goes to the hose connection on the expansion tank. It keeps the engine purged all the time even with the stat closed, normally has a restrictor in the pipe with a 2mm ish hole. Just thoughts.
http://www.emeng.gentlyhosting.co.uk/Cooling/Part1.htm
Bob |
Bob, I'm not 100% sure if I understand you, do you mean you don't think it is it a good idea to have it the way my cooling system is currently setup where I haven't connected the expansion feed from the thermostat housing and only have the expansion feed from the radiator?
If so then my cooling circuit is not complete yet and I am planning on using both of the expansion feeds (radiator + thermostat housing). I just need to order some extra alloy pipe to run to the thermostat housing and I have some extra 8mm hose and a T-piece to finish the run.