Thanks guys,
I thought the same about turning the uprights round at one point but like you Stot my upper shock mounts were already welded in place. The upper wishbone would have to be a strange design to accommodate the offset of the upright when turned around with the original upper shock mounting point.
I made my grill for my bonnet scoop this morning.....
The formers were made from 12mm ply with a 5mm gap between the two.
Placed the mesh in place and then clamped down with a bit of support from a bit of box.
This how it tuned out, just needs trimming and a coat of paint ready for bonding in place...
