Quote:
Originally Posted by davidimurray
Stot, are you using the book pedal box. I wasn't very happy with mine as I got over 1mm of flex at the master cylinder. Doesn't sound like much, but it is quite a bit at the actual pedal. I added an angle across the pedal box, and angles either side that hook around the chassis rail. I also added a stiffener under the floor as well. Made quite a difference and the pedal felt less spongy afterwards.
|
The pedal box is standard however my CP16 is made from 3mm plate instead of the book 1mm so I don't expect to see too much flex but ill be sure to check, thanks.
Cheers
Stot