That was my thoughts regarding the welds, anything I'm not happy with will be re-done but some of the rails that are wrong are the main lower rails BR1-B12.
To change those I've got to grind away most of the chassis, and without a build table there's no guarantee it will be any better when I've finished.
Apart from the chassis overall being 5mm too short, which in no way can be put down to tape user measuring error as I double and triple checked those measurements, the only bits that concern me are the suspension points.
They are only a few mm out. Will that make much difference that can't be corrected in the adjustment on the wishbones?
|