Mine is 5mm shorter overall and one corner is about 5mm higher than the other 3 due to welding distortion.
I done lots of research on how much was too much. I came to the conclusion that overall a few mm here and there wasnt a problem as long as you jig the front suspension mounts. If you look at it and its visibly out of line (a banana) then worry about it.
For me the 5mm length means a shorter propshaft in reality and the corners will be sorted by suspension height adjustments.
In practice once built and im in it I recon the ride heights and levels will change by more MM depending on what meal Ive had, wether Ive been to the loo and how much fuel is in the tank anyway.
Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD
Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|