Quote:
Originally Posted by twinturbo
Can't the hubs be swapped left to right to put the calipers at the back?
TT
|
This was an Idea I looked at but top bones would need to be redesigned as the upper and lower mounts on the uprights are offset, not centrally aligned.
(calipers are on the wrong uprights in that pic.)
You would need to change the position of the upper shock mount too. I already had the chassis and bones fully welded at that point so carried on as normal.
Flipping them would help with the handbrake cable rubbing issue too and If I were building again I probably would try that option. I'm happy that my current configuration is acceptable if not the ideal.
Cheers
Stot