Quote:
Originally Posted by twinturbo
Not sure how it's been done here but I just have a 6mm hole through the top tube to route the headlight wires into the headlight tube.
TT
|
Hi all,
I appreciate all your comments guys (good and bad) means a lot to me, helps me stick with the build.
Sorry David nearly forgot to reply.. We had some mesh kicking around at work which I believe is expanded galvanised mesh. I'll see if I can find where it came from.
I used a bit of 19mm cds tube for my light bracket passed through both side walls and fully welded both sides like a crush tube. I then covered my cables in split conduit which was just the right size to fit in the tube to stop the cables chaffing...simples.
