I think I'm getting to the finishing straight now after a busy weekend. In general I got the engine running nicely and made a start on the electrics. The dash is all working, I had cut the tach wire while removing the headlight flip stuff from behind the dash but that was easy enough to get back.
Exhaust is all in and welded up where need be. I currently have it hanging with a rubber strap at the rear.
I may make up a bracket to take a bobbin at some point I'm not sure.
Got both front lights on now, and even have them working!
And I made a cover for the rear of the tub.
I have the filler on the top there and its on a separate piece that stays attached if the rest is removed.
There will also be a leather cover for the back with the filler cap showing through at some point.
Cheers
Stot