Quote:
Originally Posted by Numplumb
Hi Stot thanks for that information I think I'll go with the same ones then, one other question the front top wishbones have unequal legs am I right in thinking that the longer one goes to the rear as the brackets don't seem to sit squarely on the uprights either way round but seems better with the long leg at the rear.
Regards Mick.
|
Actually the long one goes to the front so that the TRE is set back from center. Figure 25/Page 13 of the current Gillham/Saturn plans shows it quite nicely.
I had it the other way round at first and it caused a ridiculous amount of bump steer until I noticed the problem.
Cheers
Stot