[Davidbolam]

The next item I have attached to my build is the coolant header tank.

Here is a photo where you can see it mounted. I still need to fix the small tube in place somehow ( may replace this with solid pipe.)



I've been working on my dash as well I'm not going to post a photo of this until its done but here's a photo of my universal radius tool! Almost managed to get the radius large enough so I'm going to have to pad the lower portion of the dash.



I've also started cutting the ally for the inner side panels which I am going to cover in leatherette

I've also had the car fully up to temp and made sure the fan kicks in etc. all seemed to go well. Even had another quick drive which was fun! Must bleed my brakes properly.



David