Quote:
Originally Posted by flyerncle
Should of explained a little better,fit one good end to drum,let adjuster right off and then fit to other side and cut to fit and put nipple on the end and crimp/weld,to all intents and purposes one cable length.
Everything is inside the drum.
|
I remember Kev talking about this issue after his IVA test. I had a soldered end before, but was not happy with it.
That is what I've done (Sierra brake drums) to "improve"
2013-12-14_12-12-51 par
Voucht71, sur Flickr
2013-12-14_12-26-12 par
Voucht71, sur Flickr
I don't know if these bicycle "cable stops" (I don't know how to call them in English, sorry, but you can see what it is) are acceptable for UK's IVA. But it works very well, the diameter is just a bit smaller than the hole in the hand brake lever, and this bit fits perfectly. For my first inspection, hand brake has to be operable, and it works very well with this
