[Davidbolam]

It's been a while since I posted anything to my thread.

As it does everything was coming together nicely and then I noticed that the bellows on my steering rack were permanently touching the wishbones! A bit of a bummer I thought as surely when I bought the kit this bit should have been a simple bolt on job. I looked a chris' build and he had placed aluminium plates under the rack to lift it a little.

Very generously he sent me enough aluminium froc so I could do the same.

After a quick dismantle and rebuild everything now clears nicely. By lifting the rack though this did cause the steering rack to fouls the heater pipes. When I was installing my radiator I was paranoid that it would be too high so I put this in as low as possible. To solve this I bought some 1" billet aluminium and salted it to the existing radiator mounts. This has lifted it so there's lots of clearance. The radiator is in a much better position as its more in the airflow for the big hold at the front!

Now to fit the cycle wings. I'm sure this will come with its complications!

David