|
|
#1
1st May 2011, 02:24 PM
|
||||
|
||||
First bit of grp iv made from scratch!
Hi guys,
Iv just pulled my dashboard from the mould iv been making, its cost probably twice what spud charges, and its nowhere near as nice, its also taken ages but i really wanted to have ago at making something myself. A bit of polishing and i reckon it wont look too bad, but im well chuffed. I think the mould needs a bit more work and then il have another go and see if i can make one with woven carbon cloth and epoxy resin 
__________________
A few build photos... www.photobucket.com/ntsengineering 
|
|
#2
3rd May 2011, 09:33 PM
|
|||
|
|||
|
looking good i love research and development id love to attemp this for my own but i just havent got the patience ! what is the actual process for moulding this stuff or the lurly cf ?
ive only done a little bit of fibreglassing before and it was a right pita ! 
__________________
theres a box ! im not allowed in it ! i have to think outside ! 
|
|
#4
4th May 2011, 01:32 PM
|
||||
|
||||
|
i have got the ckc workshop from stoneleigh done by john dickens on my video camera. its a whole hour on laying up carbon fibre.
if i can find a site that will let me upload a whole hour of video then i will as its quite interesting and i have permission from John to share it.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#6
5th May 2011, 08:23 PM
|
||||
|
||||
|
that would be great, i went to a seminar with john dickens at east coast fiberglass a month or so ago, he certainly inspires confidence.
As for how the mould was made, i just made the dash from some old wood, attached some old 2inch timber at the rear on the bottom and sanded the shape into it. I then used a load of bodyfiller to get it as smooth as i could, painted it, pva'd it and covered it in four layers of matting. Then used that as a mould to lay up the actual dash.
__________________
A few build photos... www.photobucket.com/ntsengineering
|
|
#7
6th May 2011, 09:51 AM
|
||||
|
||||
|
Found a site to host it
http://www.openfilm.com/videos/ckc-w...bon-laminating his book on fibreglass is really good too.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#8
6th May 2011, 10:32 AM
|
|||
|
|||
|
hahahaaah I got a mould like that wee bump thing he is passing around
Interesting tips there though for folk wanting to have a go..  I take it Ash that demo was on at the show? Didn't know or would have gone to see that to get a fix of fumes.. Last edited by MarkB : 6th May 2011 at 11:15 AM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
