![]() |
#1
|
|||
|
|||
![]() Can anyone tell me what is the size of the bolts that secure the mushroom inserts in the front hub carriers ? I've lost the originals, so have nothing to compare.
Cheers Peter |
#2
|
||||
|
||||
![]() M12 x 45
Ford Finis code 6077664 TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
|||
|
|||
![]() Cheers TT
Peter |
#4
|
||||
|
||||
![]() yep m12
dont get 45mm ones as you have to replace them for longer ones any way as you need the thread to come right through another 15-20mm to bolt the wingstays on |
#5
|
||||
|
||||
![]() Good Call Ash, I was just going on the ford parts catalouge
![]() TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
||||
|
||||
![]() people always forget the poor little wingstays
![]() |
#7
|
|||
|
|||
![]() Some time since the initial post but I cannot get M12's to fit. I have some 7/16 bolts and fit fine. Can anyone explain please ?
Cheers Peter |
#8
|
||||
|
||||
![]() Quote:
Guess who has just cut some new bolts to be nice and flush with the edge of the upright ![]()
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#9
|
||||
|
||||
![]() Peter
99.9% sure the are a M12 standard metric thread . The threads may be dammaged, clogged with loctite reminants . Personaly I would run an M12 metric tap through them ![]() A 7/16" UNC bolt would go in there as it is just a tiny bit smaller & of similar thread pitch. Being M12 metric a 7/162UNC bolt will not provide an adequate grip & will probably strip the thread in the upright when it is torqued up ![]() Dave Welcome to the club mate. Would you like an entry in my new magazine .... FUBAR Weekly ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#10
|
|||
|
|||
![]() Cheers Ronnie,
I'll run a tap through tomorrow. Peter |
![]() |
Thread Tools | |
Display Modes | |
|
|