|
|
#2
18th February 2011, 07:45 PM
|
|||
|
|||
120 mm from center of mount to chassis rings a bell,someone will correct me if wrong.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. 
|
|
#3
18th February 2011, 07:45 PM
|
||||
|
||||
|
Mine are 120mm from the centre of the headlight mounthing hole.
Hope this helps
__________________
They say obsession will mess with my brain..... But I love the feeling of going insane.... Roadster No 2 build Cost to Date : £93 ** New Blog @ http://carlsroadster2.blogspot.com **
|
|
#5
18th February 2011, 09:04 PM
|
||||
|
||||
|
As Carl & Flyerncle have said, 120mm from the hole center to the outside edge of the chassis rail, if you weld the brackets to the side of the chassis rail ( TR1 & TR2 ) just above the upper shock bracket it will mean you don,t have to cut the nose cone,
if you position the brackets as above, give some thought to how you will route the wiring BEFORE you weld them into place  cheers andy
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Headlight Bracket
Linear Mode
