|
|
#1
6th March 2011, 02:24 PM
|
||||
|
||||
CP16/17 passenger side?
Just wondering if there should be an equivalent of CP16 and 17 in the passenger footwell?
Or is the passenger side just ally-panelled? 
|
|
#2
6th March 2011, 07:12 PM
|
||||
|
||||
|
Hi Skov
The passenger side has all alloy panels  On the drivers side, the steel side plate helps to provide more room for the drivers feet & the steel bulkhead panel compliments the steel pedal box assembly to add further strength  Personally I used 2mm sheet steel for those panels, I just happened to have some 2mm Zintec kicking about the place.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#3
6th March 2011, 07:26 PM
|
||||
|
||||
|
Cool - thanks Bonzo
|
|
#4
6th March 2011, 10:22 PM
|
|||
|
|||
|
im thinking of leaving the steel plate off and making it out of ali i need the extra space on the gearbox side and i have a different trans tunnel.
anyone see any majour issues i cant ? 
__________________
theres a box ! im not allowed in it ! i have to think outside ! 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
