![]() |
|
#1
|
||||
|
||||
![]() hi guys, sorry to ask , but i cant find a tutorial for converting the rear tub to the glassfiber one, just wondered if there is one?
|
#2
|
||||
|
||||
![]() Here's HAndy's measurments that worked fine for me...
long rear box tube = 99cm the 2 spars from RS14 to the 99cm tube = 17.6cm, set at 5 degree,s upwards. the 99cm tube is an odd dimension which is to allow the inner radius curve of the grp tub. ![]() Got any piccies yet?
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#3
|
||||
|
||||
![]() cheers bud,
is there still an upper frame to make? got loads of pics but need to start a blog |
#4
|
||||
|
||||
![]() There's no need for an upper frame as the grp supports itself, you can pop round for a look sometime if you're passing
![]() ![]()
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#5
|
||||
|
||||
![]() cheers, i might be up your way this weekend if im not forced to work.
That back end looks awssome, think im gonna go for white. |
![]() |
Thread Tools | |
Display Modes | |
|
|