ali seats

[LeonN]

has anyone done them yet?
had a quick search but to no avail.
i have made a better net than the one in the book from card . at least a moor ergonomic net , but i can not make a decision on the thickness of aluminum to use?
are there any rules to adhere to? bare the head restraint and correctly positioned harness holes.

[ozzy1]

Try this link, these look really good.

http://www.streetperformance.com/m/c...brication.html

[LeonN]

Thaye do look cool. Apear to be in ither .100 or .125 of an inch and grade 5052 ally. My boss thought 3mm and did not mention a hardness. Any other thoughts?

[thwang]

hi
leon
semi hard is ok i would ask chris about the thickness you might beable to go down to 2mm with 5000 series ally.
thwang
have you mocked one up i would mind seeing one if you have.

[LeonN]

Have a cardbord one. Need to cross check all the meshermants and angles with trig.

[LeonN]