|
#1
|
|||
|
|||
cut list for new chassis
hello everyone,
first time builder here... so I've sored my dona car - I'm not turning my attention to the chassis does anyone have a cut list. primarily I'm looking to know... how much (length) chassis steel i need? how much seamless tube do i need? if I'm going to looking/asking for stuff i need to know how much i need. thanks in advance for the help. thanks Dave |
#2
|
|||
|
|||
A Handy Andy Flatpack would be a good start...all cut at super accurate angles all for very little more thatn you could buy the metal for !!
|
#3
|
|||
|
|||
Welcome to the mad house Dave,
Can't help with your question. Where abouts in the big wide world are you? Just remember this one thing, we love pictures of people's builds Terry |
#4
|
||||
|
||||
|
#5
|
||||
|
||||
or here...
dave1973,
firstly welcome to the forum. Have a look here: http://www.haynes.co.uk/forums/showthread.php?t=6377 and here; http://www.haynes.co.uk/forums/showthread.php?t=6263 They might prove helpful. Good luck with your build and keep us posted ( / groan!) with your progress. |
#6
|
|||
|
|||
As previous post id recommend a flat pack chassis, for the time spent/money spent on raw materials i dont think its worth the bother. unless you get some weird kick from hacking steel up!
Ive a handy andy one and am chuffed to bits with it. Although Talon does one too. Cheers Will |
Thread Tools | |
Display Modes | |
|
|