|
#1
|
||||
|
||||
Rear lower outer wishbone bolt
As above what have you guys been using? long bolt or studding? and high tensile or not? Ray
|
#2
|
||||
|
||||
i used high tensile studding, more so that i could adjust the length to my liking, personal preference i suppose.
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
#3
|
||||
|
||||
I went to my local bolt man and bought a couple of allen headed
bolts the right length. Only cost a couple of quid each. I personaly don't like the idea of studding. (But that's just me.. ) And yes definatly H/T. Don't use B&Q rubbish. David |
#4
|
|||
|
|||
It has been said by some that every root of the thread on studding or bolt is a possible failure point,so my personal view for something so critical would be Dogwood's long bolt. (nothing personal David !)
|
#5
|
||||
|
||||
Ok will look for some really long bolts, Didnt think you could get them that long. thanks
Ray |
#6
|
||||
|
||||
what about a good old fashioned rivet? Design it to have radi instead of sharp corners, sure to have no weak points.
__________________
Regards (The mad Sarf Efriken) |
#7
|
||||
|
||||
Quote:
This was 18months ago I bought them David |
Thread Tools | |
Display Modes | |
|
|