|
|
|
|
#1
5th August 2009, 10:58 PM
|
|||
|
|||
welder update
A while ago i mentioned about updating my cosmo welder because I was not happy with what it was doing.
Problems 1. Constant wire feed isues ( birds nesting after feeder and jaming in hand set ) 2. Speed control in a world of its own. ( cold start probs, sudden spikes when arc starts. ) 3. Only having about 1.5 mtrs to play with. it is only a sip/cosmo turbo 150 mig but i had to send it back 3 - 4 times when new because of silly little things going wrong on it. In the end I thought sod it ill sort it out my own way. First things first I took the welder to bits and found that the wire feed motor was driven by the main transformer and caused the wire to pulse on what ever im working on. i put another transformer in side to drive the the wire feed and a diffrent speed controller. also converted it to euro tourch mb15 and .6mm wire . all seems well atm not 1 jam pulse and a constant wire feed now 
|
|
#2
5th August 2009, 11:07 PM
|
||||
|
||||
|
Nice one
 A true locoster in action, find a problem & find the solution  A Euro torch conversion is always worthwhile, it will transform even the most basic budget MIG welder 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#3
6th August 2009, 08:25 AM
|
|||
|
|||
|
it is a diffrent machine now and I am well please with the results now, I know it wont be the best welder in the world but its mine and it is welding to a high standard now. I will post some pics soon
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
